Description
The TeeJet Eductor Nozzle is commonly used to circulate large volumes of liquid in large sprayer tanks and ponds. NOTE: Large capacity centrifugal pumps are required to operate the Eductor Nozzle.
The model (2 mp) Eductor – 3/8″ (9.5 mm) requires 16 gpm (61 Lpm) to operate at 30 psi (2.0 bar) if attached directly to a pump for pond circulation and a minimum of 3000 gph (11,360 Lph) pump is required. For spray tank circulation pump capacity should EXCEED 100 gpm (378 Lpm).
The model (4 mp) Eductor – 3/4″ (19 mm) requires 23 gpm (87 Lpm) at 30 psi (2.0 bar) if attached directly to a pump for pond circulation, and a minimum of 5000 gph (18,930 Lph) is required. For spray tank circulation, pump capacity should EXCEED 160 gpm (605 Lpm).
- For ponds exceeding 2′ (0.6 m) in depth.
- Creates a playful environment for Koi to enjoy and build muscles.
Please refer to the Capacity Chart in the Resources section for more info.
| TeeJet Part | Pipe Thread Inlet Connection | Orifice Diameter | Length | Diameter |
|---|---|---|---|---|
| Y33180-PP | 3/8″ male (9.5 mm) | 5/16″ (8 mm) | 4-1/16″ (103 mm) | 2-1/16″ (52 mm) |
| Y9270-PP | 3/4″ male (19 mm) | 3/8″ (9.5 mm) | 6-3/8″ (162 mm) | 2-29/32″ (74 mm) |
